"Michigan 50 Companies to Watch"
January 2007 –
EBW
Electronics has been recognized as one of the “Michigan 50
Companies to Watch”.
Companies nominated for
the “Michigan 50 Companies to Watch” list must be second-stage companies,
defined as having 6 to 99 full-time-equivalent employees and generating
$750,000 to $50 million in annual revenue.
Winners were selected by
the Michigan Certified Development Corporation, Michigan Small Business &
Technology Development Center, the Small Business Association of Michigan,
the Michigan Economic Development Corporation, the U.S. Small Business
Administration-Michigan and the Edward Lowe Foundation.
Information about the
2007 Michigan 50 Companies to Watch program can be found at
EBW News
Engineering Design &
Manufacturing
EBW
Electronics understands lighting and manufacturing and can help integrate
the electronics for LED applications through design and manufacture. Please
review our capabilities and give us a
call!
|
|
Capabilities |
| ISO9001 Registered
Michigan Top 50
Engineering Design
Manufacturing
LED Integration
Printed Circuit Boards
Circuit Board Design
Contract Assembly
Fluorescent Ballasts
Turnkey Assemblies
UL, CSA Approvals
Ph 800-787-0575
|
|
| |
|
|
Electronic Fluorescent
& UV Ballast
Exceptional Engineering
Support
Off-the-shelf & Custom
Solutions
EBW Electronics offers 43
standard electronic ballast solutions! You can see them all
on our OEM Ballast web page.
EBW Electronics built its reputation in the ballast
industry taking on the hard assignments for premium ballast
designed specifically to meet the uncompromising
requirements of some of the largest companies in the world.
Featured Ballast: T8 Multi-Watt / Low Cost Ballast
Click here to print
specification sheet
Our high performance “T8 Multi-Watt” ballast design
employs these very same standards offering a premium
performance at a competitive cost and can drive any of your
17W, 25W, 32W or 40W lamps with no loss of performance from
one lamp type to the other. This means a single ballast to
inventory for all your requirements.
T8 Multi-Watt Features:
Advanced design produces low cost
Enhanced performance characteristics
One ballast drives 17W thru 40W lamps
Stock just 1 ballast for most lamps
Enhanced start cycle extends lamp life
Available in 3 wire lengths to 50 inches
Lower inventory & administrative costs
Robust design means fewer field problems
120 VAC; UL/CUL Listed, ISO9001
15 yrs field experience went into design
30,0000 hr ballast life expectancy
T8 Multi-Watt Specifications:
Lamp Type T8 Multi-Watt 17W-40W
Catalog Number E-1E-NNP-1-30
Supply Voltage 120VAC +/-10%
Supply Frequency 50/60 Hz
Input Current/Input Power
40W Lamp 0.30A / 35.5W
32W Lamp 0.25A / 30.3W
25W Lamp 0.20A / 23.6W
17W Lamp 0.14A / 16.5W
Input Power Factor >=0.97
Total Harmonic Distortion <10%
Ballast Factor
40W Lamp 0.92
32W Lamp 0.95
25W Lamp 0.92
17W Lamp 1.04
Ballast Efficacy Factor
40W Lamp 2.3
32W Lamp 3.0
25W Lamp 3.9
17W Lamp 5.0
Start Class Modified Rapid Start
Minimum Starting Temp 32 Deg F Typical
Maximum Ballast Case Temp1 149 Deg F Max
Lamp Current Frequency >40 kHz
Lamp Current Crest Factor <1.7
Thermal Protection Inherent UL Class P
Lamp EOL Shutdown No Lamp or
Lamp Fail-to-Strike
Agency Compliance UL/CUL Listed
Transient Compliance ANSI C62.41
EMC Compliance FCC, Class A
Sound Rating Sound Rated A
Enclosure Metal
Dimensions 1.25" h x 1.75" w
6" mount
Termination Soldered 18 AWG
Wire lengths 3 lengths available
Click here to print the
Specification Sheet
Special T8 Multi-Watt Pricing & Samples From
Stock!
Toll-Free Call 1-800-787-0575
email:
ballast@ebw-electronics.com
Ballast Replacement
Chart & Online Ordering
On-Line
Ordering
|
|
Printed Circuit Board
Assembly
Exceptional Engineering
Support
Circuit, software & layout
Design; Prototype & Production
EBW Electronics excels at creating flexible
tailor-made solutions for our customers and translating
ideas into successful results!
EBW Electronics works with their customers early in the
design phase to ensure cost-effective printed circuit board
design solutions and assemblies optimized for
manufacturability. EBW Electronics process controls
consistently produce the highest possible quality
assemblies.
Our ISO 9001/2000 certified manufacturing facility is
equipped with automated solder paste stencil machines,
Universal & Tyco SMD pick/place machines,
reflow/select/infra red solder capabilities, Yes Tech AOI
Vision inspection & X-ray Imaging systems, and bed-of-nails
test equipment as well as job specific functional testing.
Process controls include monitored viscosity of solder
paste, solder oven profiling, and vision systems with an
accumulative library.
EBW Electronics utilizes a robust enterprise system for
tracking quotes through product end-of life and offers bar
code inventory tracking from receiving through manufacture,
and customer engineering access to BOM’s in a variety of
configurations to assist your design efforts.
PCBA Manufacturing Capabilities:
Manufacturability design review
Meet target cost
Achieve repeatability of process
Provide a robust design
Ensure consistently high quality
Component selection assistance
Circuit design assistance
PCBA layout
CAD & Gerber file creation
Prototype builds
Microprogramming
Universal & Tyco SMD equipment
Through-hole to SMD conversions
Universal Through Hole equipment
Double-sided circuit assemblies
Mixed SMD/Through hole assemblies
Sensitive LED processing
Fine pitch down to 0.016”
BGA capable—X-ray imaging system
Wide range of volume, mix and complexity
In-circuit (MDA) testing
Automated Optical Inspection
ISO 9001-2000
More about our
Contract Electronics Manufacturing!
Call us to find out more
about our flexible tailor-made solutions for Printed
Circuit Boards, turn-key assemblies, creative
partnership concepts and much more!
Toll-Free Call
1-800-787-0575
ebwe@ebw-electronics.com
|
